Description
Hall Research
8 ports VGA + Power over UTP Sender/Splitter
Video and Phantom Power over UTP Extender
The Model UV8-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 8 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor.
The UV8-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor.
In most setups only one power supply is necessary for the entire system.
The UV8-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers.
For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-GS569).
Made in the USA.
- Support for local monitor at transmitter
- Multiple Cat-5 outputs
- Transmit video and phantom power on a single CATx cable
- Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
- Amplifies the signal for clean and crisp transmission
- Differential signaling eliminates ground loops and noise
- Handles resolutions up to 1920x1200 at 60Hz
- Rugged, Reliable, Compact size
- Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
- Drive standard CATx cables to 500 feet for VGA and Component Video
- Unity
- VGA, SVGA, XGA, or UXGA video
- VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
- Up to 1920x1200 and 1080p at 500 ft
- 1 analog signal input. Standard VGA output RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync)
- 4 or 8 female RJ-45 output
- 1 HD15 video input
- 1 HD15 local video output
- 1 V p-p for Y of component video
- 0.7 V p-p for RGB and for Pr and Pb of component video
- 4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS
- 75 Ohms
- Up to 500 ft. (150 m) for VGA and Component Video
- Positive or Negative
- 100 VAC to 240 VAC, 50-60 Hz, external; 9 VDC regulated, Center Positive
- Hall Research. Zero-Skew™
- Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
- Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
- Steel
- 1.66" H x 8.42" W x 2.60" D
- (42.2mm H x 214mm W x 66mm D)
- Depth excludes connectors
- 4.0 lbs (1.81 kg)
- ISTA 1A in carton (International Safe Transit Association)
- CE
- CE, FCC Class A
- 90,000 hours (Calculated Estimate
